ZeroTol works on contact to kill plant pathogens and their propagules, including spores. Formulated with our powerful and stable peroxyacetic acid chemistry, use ZeroTol starting at propagation through production to protect crops, including fruits and vegetables.
ZeroTol knocks out harmful organisms that could damage turf, greenhouse fruit and vegetables, nursery crops, and ornamentals. ZeroTol fast-acting oxidation process has broad-spectrum application. By incorporating ZeroTol into an integrated pest program, and using it before pathogen emergence, it creates a more prepared growing operation.
ACTIVE INGREDIENTS
- Hydrogen Peroxide
- Peracetic acid
ZEROTOL APPLICATION RATES
Foliar spray | 0.5–1.25 fl. oz./gallon. Use non-ionic spreader/sticker. Use lower rate more frequently on softer vegetation. Spray Intervals: 5–7 days |
Drench | 0.5–1.25 fl. oz./gallon. Use non-ionic wetting agent. Spray Intervals: As needed to remove root zone infestation |
Mist propagation – continuous rate | 25.6 fl. oz.–128 fl. oz./1,000 gallons |
Cutting dip | 0.5 fl. oz./gallon. 45–60 seconds, air dry |
Turf | 1.25–2.5 fl. oz./1,000 sq. ft. 2–3 gallon solution. Use non-ionic wetting agent to aid penetration and contact. |
Boom irrigation | When using boom irrigation inject ZeroTol as a continuous application at a rate of 1:2,500-1:5,000. |
Fogging | ZeroTol can be applied as an aerosol/fog using approved commercial cold or thermo fogging equipment. Use a rate of 5.0-16.0 fl. oz. of ZeroTol per 10,000 sq. ft of greenhouse area mixed in 0.5-1.0 gallon of water. * Not approved for use in California |
Pre-plant dip | Use 64 fl. oz. per 50 gallons of water, a dilution of 1:100. 2. Immerse plants or cuttings. Remove and allow to drain. Do not rinse. |
Nutrient/Reservoir tank | Use at a rate of 1:2,000-1:10,000 (0.128-0.64 fl. oz per 10 gallons of water). Use lower rates (1:5,000 or less) for seedlings and/or plants with sensitive root systems. Recharge as needed when fresh water is added, or at least once every 5-7 days. |